Warner Electric X2DRV - Manual (Page 3)

Warner Electric • +33 (0) 2 41 21 24 24 P-2098-WE-A4 3
GENERAL INFORMATION:
Control chassis should be kept clear of all areas where foreign material, dust, grease, or all might affect the operation
of the control. Installation must be made in accordance with the instructions found in this manual. Failure to do so
may damage the Driver.
This driver supports the following Warner brakes : TB’s, ATT’s, MPB’s, MPC’s. POB’s, POC’s and MTB’s brakes can-
not be driven by this device.
INSTALLATION INSTRUCTIONS:
HARDWARE PIN OUT: