White’s Electronics Spectra V3 - Manual (Page 29)

Complete Owner’s Guide - Spectra 29
®
How Can I Quickly and Easily SAVE One Option Change?
“Quick Save”, described under Live Controls, also works for individual changes within any Menu. Specific
change in the Expert Menu can be added as the current Program’s default. Hold ENTER and press MENU, new
window appears, select Save As Default, and press ENTER. That change has now been added as a Default for
that program.
Expert Menu -
Expert Menu includes all Six Block Menu selections and the following additional options beyond the
Six Block Menu -
Programs Detailed
• Select – Choose a Program.
• ARROW down to SELECT and press ENTER.
• Use ARROW Up & Down to select the PRORAM you want to use, then Press ENTER.
• Squeeze and release toggle twice to begin searching using that program.
• Save – Save changes you have made to any program as that programs new underlined or check
marked defaults and standard starting settings.
• Make the desired changes to a Program.
• Press Menu twice, ARROW to EXPERT MENU, and press ENTER.
• Press ENTER to ENTER PROGRAMS, ARROW down to SAVE and Press ENTER.
• Use ARROW Up & Down to select the PROGRAM you wish to SAVE.
• Use MENU /TAB to Tab between selecting a program, selecting the Save box,
and/or selecting Cancel.
• Tab to SAVE and press ENTER to save changes made to that listed program.
• Squeeze and release toggle to exit.
Spectra keeps copies of all the original factory programs in its Library. The modified and Saved program
automatically becomes the default version immediately available from Live Controls and both Menus under PRO-
GRAMS.
There are ten Programs kept within the standard PROGRAM listings (Live Controls, Menu, and Expert
Menu). However, many more PROGRAMS can be kept in the Library. Keep the most used PROGRAMS under
standard PROGRAMS, and store the less often used PROGRAMS in the Library.
• Restore Load – Used to return a program to the original or last manually saved defaults, or activate a
program from the Library.
• Select Restore/Load and press ENTER.
• Use ARROWs Up & Down to select program to restore or load.
Remember, indicates it is a modified version of the original factory
program.
• Press MENU/TAB to tab between selecting a standard program, selecting where to look for
a Program, Saved Copy, Library, or an Active Program, ENTER, and ARROWS to make
selections.