American DJ DMX-512 - Manual (Page 13)

COPY BANK OF SCENES:
This function will copy the settings of one bank to another.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Select the BANK (FIG.4) you want to copy
3. Press and release the MIDI/REC BUTTON (FIG.7)
4. Select the BANK (FIG.4) you wish to record to.
5. Press MUSIC/BANK COPY BUTTON (FIG.9), The LCD DISPLAY (FIG.3)
will flash briefly to indicate the function has been completed.
DELETE BANK OF SCENES:
1. Select the BANK (FIG.4) you want to delete
2. Press and hold the AUTO/DEL BUTTON (FIG.8).
3. While holding down the AUTO/DEL BUTTON (FIG.8) press and hold
the MUSIC/BANK COPY BUTTON (FIG.9) at the same time.
4. Release both buttons at the same time, the LCD DISPLAY (FIG.3)
should flash momentarily to indicated the function completion.
DELETE SCENE :
This function will reset all DMX Channels in a single SCENE back to 0.
1. While pressing and holding AUTO/DEL(FIG.8), Press and release the
SCENE BUTTON (FIG.2) 1-8 you want to delete.
RESET ALL SCENES:
This function will erase all scenes in all Banks
(ALL Channels of all scenes are reset to 0 output).
1. Press and hold down the PROGRAM button (fig.6)
2. While holding down the PROGRAM BUTTON (FIG.6), press and hold
the BANK DOWN BUTTON (FIG.4).
3. Disconnect the power and release the buttons.
4. Reconnect the power, all scenes should be erased
American DJ Los Angeles, CA 90058 - DMX OPERATOR User Manual