WolfVision VZ-35 - Manual (Page 6)

WORKING ON THE WORKING SURFACE
1. Place your subject material on the working surface. For background use either the white side or the black
side of the working plate. For some objects the best presentation can be made with colored background.
2. Tilt the reflector head (#10) so that the object is illuminated.
TV-Monitor Video projector
DO NOT TOUCH THE MIRROR,
AS FINGERPRINTS CAUSE
BRIGHT AND HAZY SPOTS
ON THE PICTURE ! ALWAYS
KEEP THE MIRROR CLEAN !
CAUTION: SENSITIVE FRONT
COATED MIRROR!
3. Select the enlargement required with the ZOOM keys (#15,#16) on the control panel or the
infrared remote control.
4. Adjust the sharpness with the FOCUS keys (#17,#18) on the control panel or the infrared remote control.
For showing 3-dimensional objects with the Wolfvision-Visualizer, just place them on the working surface
and adjust ZOOM and FOCUS (as mentioned). Due to a special Wolfvision lens the object can be up to 9.7"
(25 cm) in height. If the object is to big for the working surface or if you want to show it from the side just
place it behind or in front of the unit and tilt the reflector head.
WORKING OUTSIDE THE WORKING SURFACE
In this way it is also possible to make recordings
of subjects in the room or surrounding area, as
with a video camera by just tilting the reflector
head.
Due to the great focal range it is possible to
show details even from a great distance to
the unit.
If you want to record people you should turn off the light with the LIGHT off key (#23), so that they are not
dazzled.
AUTOIRIS / MANUAL IRIS
The Wolfvision Visualizer is equipped with autoiris. That means that the brightness of the camera image adjusts
automatically. Using the IRIS keys (#19,#20) on the control panel or the remote control the autoiris function is
switched off. In this mode the Iris can be adjusted manually.
When using the ZOOM keys (#15,#16) on the control panel or the remote control the autoiris function is
switched on again
6