WolfVision EYE-14 User Manual - Manual (Page 9)

1. The Center Lasermarker on the working surface marks the center of the pick-up area of the built-in
camera. Just center your subject material to the laser spot.
2. Select the enlargement required with the ZOOM keys (#34).
3. The Auto Focus will adjust the sharpness automatically. The focus can be adjusted manually by using
the FOCUS keys (#35).
Shooting Area On The Working Surface
8
screen
center of pick-up are
Ceiling
EYE-14
laser beam of
center marker
Picture center
The Center Lasermarker marks the center of the pick-up area of the built-in camera on the working surface.
The laser beam is made for flat objects and it is not visible in the image.
Due to the oblique mounting of the camera and the laser module, the laser beam shifts to the left or right
edge of the pick-up area when the distance between the EYE-14 and the scanned object is changed (e.g.
when capturing tall objects).
This means that the laser beam no longer exactly marks the center of the pick-up area.