Yuh Dak SIC-A series - Manual (Page 20)

6-4
6.3 Machine Shut Off
1) Turn off the compressor.
2) Turn off the pump.
3) Turn off the main switch.
Note!
Avoid electrical shock when main switch is turned on.
Note!
In order to reduce the possibilities of machine damage and prolong
the life, shut off the machine with correct methods.
6.4 Temperature Controller
Temperature
setting
Temperature hysteresis
value
Increase value
Decrease value
Temperature display
6.4.1 Functions of temperature controller
There are two kinds of different control output for this controller. The
setting points of the two control mode are on and off, the differences
are that the actual value is lower than the setting value in the cooling
control mode, that is to say, keeps off sate; however in the heating
control mode the control output is turned to on state.
6. Operation Guide