ZOLL AutoPulse Rev A - Manual (Page 13)

P/N. 12457-001 Rev. 2 Page 2-1
Power System User Guide
2 AutoPulse Li-Ion Battery
The AutoPulse Li-Ion Battery (see Figure 2-1) is a proprietary, rechargeable, removable Lithium-Ion
battery that is a power source for the AutoPulse Platform.
The AutoPulse Li-Ion Battery is mechanically keyed to the AutoPulse Platform and Multi-Chemistry
Battery Charger to facilitate correct installation. One end of the AutoPulse Li-Ion Battery contains
connections for power and communications. A Battery Status Check button illuminates the AutoPulse
Li-Ion Battery’s status light-emitting diodes (LEDs).
ZOLL recommends that users change AutoPulse Li-Ion Batteries daily or after each use. Charged
AutoPulse Li-Ion Batteries left for an extended period in the AutoPulse or as a spare may not have
sufficient capacity to operate effectively.
Caution: Remove the protective plastic cap from the Battery before attempting to charge the Battery.
Caution: Only use ZOLL Batteries specifically designed for use with the AutoPulse System. The use
of other batteries may cause permanent damage to the AutoPulse Platform and will void the
warranty.
Warning: Always charge a stored Battery before placing the Battery in active operation. Battery may
self-discharge when not in use. Failure to charge a Battery before use may cause device
power failure. In no case should any Battery be used if it has not been charged within 2
days.