Screen saver mode submenu (scrsvr mode), Figure 8. screen saver default menu cycle – Extron Electronics VTG 300_300R User Guide Rev. E User Manual

Page 17

Advertising
background image

VGA 31.5kHz

640x480 @60

Power

on

3 sec.

3 sec.

3 sec.

3 sec.

AUDIO LEVEL

-10dBu 245mV

AUDIO FREQ.

800 Hz

60-543-02

FW Ver. 2.04

EXTRON

VTG 300R

SCREEN SAVER

ACTIVE

Figure 8.

Screen Saver Default Menu Cycle

Screen saver mode submenu (ScrSvr Mode)

If the screen saver timer has been enabled (see the

Screen saver timer submenu

), the

resulting screen saver display may be in one of two modes. The Blank mode will display
a blacked out screen, and the Cycle mode will display all six categories of test patterns at
4 second intervals.

NOTE: Although the output screen will be blacked out when the Blank screen saver

mode has been selected, the output sync will still remain active.

Press any  or  button to select from among the screen saver modes:

Blank – displays a black screen

Cycle – displays the six test pattern categories: crosshatch, H pattern, color bars,
grayscale, alternating pixels/multiburst, and white field

Figure 8

shows the modified default menu cycle whenever the screen saver feature is

activated. The additional Screen Saver Active menu will be displayed in the default menu
cycle.

VTG 300/300R • Operation

11

Advertising