Extron Electronics SW DVI Plus Series User Guide - Manual (Page 31)

SW DVI Plus Series • Remote Configuration and Control 25 25 25
Figure 24. Universal Switcher Control Program Window
Using the Help System
For information on how to use the Universal Switcher control program and explanations of
its features and functions, access the help program using any of the following methods:
• On your desktop, click Start > All Programs >
Extron Electronics > Universal Switcher > Universal Switcher Help .
• From within the switcher control program, select Help > Contents on the task bar.
• With the switcher control program open, press the <F1> key.
Updating Firmware Using Firmware Loader
Updates to the SW DVI Plus Series firmware are made available periodically via the Extron
website. You can find out what version of firmware is currently loaded on your switcher by
entering the SIS Q command via the RS-232 interface (see “
Using Simple Instruction Set
[SIS] Commands ” on page 18 for the procedure for entering SIS commands).
Downloading and Installing Firmware Loader
Extron recommends using the Firmware Loader software to update the firmware on the
SW DVI Plus. If you do not already have Firmware Loader installed on your computer,
download it as follows:
1. Visit the Extron website at www.extron.com and click the Download tab.
2. On the Download Center screen, click the Software link on the left sidebar menu.