Extron Electronics System 7SC - Manual (Page 45)

3-17 System 7SC • Operation and Configuration
Information/System Options
The Information/System Options menu provides information on the System 7SC
(firmware version and part number) and on the projector and driver. The switcher
can also be reset to factory default settings via this menu.
Extron
System 7SC
INFORMATION
SYSTEM/OPTIONS
Sys 7SC VerX.XX
PN 60-340-01
MENU
MENU
SWITCHER SETUP/
CONFIGURATION
MENU
AUDIO/VIDEO
ADJUSTMENTS
MENU
IR LEARNING
CONFIGURATION
MENU
NEXT
No Driver
No Version
SHARP XGNV6XU
IR Rev CUSTOM
NEXT
Reset to Default
Press Menu&Next
NEXT NEXT
NEXT Projector and driver
information
Drivername or Custom
Version of the driver
Please Wait
Resetting System
Confirm Reset
Press Menu&Next
NEXT
MENU
NEXT
4 sec.
Reset to Default (clearing settings and adjustments)
Resetting the System 7SC clears all the user-made settings and adjustments from
the System 7’s memory and replaces them with the factory default settings. This
includes settings for audio level, color, tint, brightness, contrast, detail, and
centering. All inputs will be reset to RGB input.
When the system is reset, the IR and RS-232 commands and drivers will remain in
memory.
Global system reset
A global system reset clears and resets all of the System 7SC’s settings, including
the settings/adjustments discussed above and all programming, IR and RS-232
commands, and drivers. To perform a global reset, press and hold the Menu and
Next keys while connecting the System 7 to an AC power source.
Image adjustments
All the image adjustments are stored in memory and can be set separately for each
input. Image adjustments apply to scaled video output only; RGB signals are
passed through without adjustments.
Color, tint, brightness, contrast, detail
To adjust an image for color, tint, brightness, contrast, or detail, follow the steps on
the next page. An illustration of making color adjustments shows the process,
which is the same for all the image adjustments.