IEI Integration SPCIE-C2160 - Manual (Page 110)

SPCIE-C2160 PICMG 1.3 CPU Card
Page 94
5.4.1.2 NB PCIe Configuration
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
NB PCIe Configuration
PEG0
Not Present
PEG0 – Gen X [Auto]
Enable PEG
[Auto]
Detect Non-compliance Device [Disabled]
Configure PEG0 B0:D1:F0
Gen1-Gen3
----------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 24: NB PCIe Configuration
Î PEG0 – Gen X [Auto]
Use the PEG0 – Gen X option to select the support type of the PCI Express (PEG)
controller. The following options are available:
ƒ Auto Default
ƒ Gen1
ƒ Gen2
ƒ Gen3
Î Enable PEG [Auto]
Use the Enable PEG option to enable or disable the PCI Express (PEG) controller.
Î
Disabled Disables the PCI Express (PEG) controller.
Î
Enabled Enables the PCI Express (PEG) controller.
Î
Auto D EFAULT The PCI Express (PEG) controller is disabled if no
PCI Express devices are connected.