IEI Integration PCIE-Q870-i2 - Manual (Page 109)

PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 92
Î
Disabled Disable the parallel port
Î
Enabled D EFAULT Enable the parallel port
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=5
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5
Î
IO=378h;
IRQ=5, 7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5, 7
Î
IO=278h;
IRQ=5, 7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ5, 7
Î
IO=3BCh;
IRQ=5, 7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ5, 7
Î Device Mode [STD Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
ƒ STD Printer Mode Default
ƒ SPP Mode
ƒ EPP-1.9 and SPP Mode
ƒ EPP-1.7 and SPP Mode
ƒ ECP Mode
ƒ ECP and EPP 1.9 Mode
ƒ ECP and EPP 1.7 Mode