Figure 4-13: sata drive cable connection – IEI Integration PCIE-Q870-i2 User Manual
Page 77
Advertising
PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 60
Step 2:
Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector until it clips into place. See Figure 4-13.
Figure 4-13: SATA Drive Cable Connection
Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-14.
Step 4:
Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 4-14.
Step 0:
Advertising