AB Soft PicoTM Controller 1760 - Manual (Page 9)

1 Publication 1760-GR001C-EN-P - April 2005
Chapter
1
Pico Controller
Safety Information
Simply Pico Clever Switching and Controlling
Pico is a compact, user-friendly and low-cost controller for simple
control applications. Applications range from building and domestic
automation to machine and plant control. Pico has built-in
user-friendly operating elements and an LCD display.
Connect Pico and draw a circuit diagram on the display by pressing
the buttons on the device. Pico works with make contacts, break
contacts, and relays.
Enter a circuit diagram in Pico just like it is sketched on paper. Pico
has basic and advanced functions for relays, time switches and
contactors, among other functions. Make changes to the circuit by
pressing the buttons on the device. Time consuming rewiring is not
necessary.
ATTENTION
Electrical Shock Hazard
The electrical installation and commissioning work
must only be carried out by suitably qualified
personnel.
Do not work on the device when the power is turned
on.
Observe the relevant safety regulations:
• Turn off the power
• Make sure that the device cannot be powered on
again inadvertently
• Check to make sure that no dangerous voltages
are present before working on the device