APM SG-VT02 QB - Manual (Page 11)

Additional Control Commands
Car Owners and Contact persons can use their authorized mobile
phone numbers to control the central locking system and lock or
unlock the vehicle doors through short message commands.
¾
To use SMS command to lock the vehicle doors, type and send this
command to the Vehicle Unit:
$DOR,1
Î Enter Vehicle Unit Number Î Send
¾ To use SMS command to unlock the vehicle doors, type and send
this command to the Vehicle Unit:
$DOR,0
Î Enter Vehicle Unit Number Î Send
Car Owners and Contact persons can use their authorized mobile
phone numbers to enable or disable the engine immobilizer via short
message commands:
¾ To use SMS command to lock the vehicle engine and doors, type
and send this command to the Vehicle Unit command:
$ENG,1
Î Enter Vehicle Unit Number Î Send
¾ To use SMS command to unlock the vehicle engine and doors, type
and send this command to the Vehicle Unit:
$ENG,0
Î Enter Vehicle Unit Number Î Send
20
NOTE: To use remote control commands from
authorized Contact numbers, you will need to
enable Caller ID features on your cell phone.
8. Car Alarm/ Anti-Theft Features
As soon as the Security of the SuperGuard
Vehicle Unit has been activated, the following car
security features will come into effect:
Car Doors Open
¾
If the car door has been opened while the Vehicle Unit is in armed
status:
‰
The alarm siren will sound for 30 seconds.
‰
The Vehicle Unit will send an alarm message with updated
GPS positions to the Control Base. The Control Base
software will find the street name and closest intersection
from a map server and send these details through SMS
short messages to a list of up to three authorized Contact
persons, with the text (example):
‰
If present, users can also track their vehicle on a Website
via Internet Explorer or mobile on GPRS enabled cell
phones.
21
Peter’s truck is in Roosevelt
Blvd., near intersection
Madison; GPS Car Alarm:
Door Open