APM SG-VT02 QB User Manual

Page 8

Advertising
background image

Finish the Installation


o To ensure that the Vehicle Unit

is able to operate even without
vehicle battery support, you will
need to connect the supplied
spare battery to the device.

o Insert the battery into the

battery compartment and
connect both connectors. Close
the top cover of the device and
fasten it to the unit with the
supplied screws.


o The GPS Aerial shall be installed either top of the dashboard or

close to the rear window of the car, so that it can see the sky. It
will pick up signals through glass and plastic, but will not “see
the sky” through metal or other conductive surfaces. To avoid
distractions of the GPS signal make sure the distance to
metallic objects is at least 10 cm.

14

GPS Aerial

GSM Antenna




































15

NOTE: Please note that adhesive sun absorber
screens may consist of metal. This can distract or
block the GPS signal. In that case the GPS aerial
should be mounted outside of the vehicle.

Advertising