B.2.2 using dos command, Figure b-8: bios updating file directory – IEI Integration ICE-DB-T6 User Manual
Page 102
Advertising
Type 6 Carrier Board Design Guide
Page 92
B.2.2 Using DOS Command
To update BIOS in the DOS environment, prepare a USB flash drive that contains boot
files and BIOS updating files shown in the figure below and follow the steps below to
update BIOS.
Figure B-7: USB Flash Drive and BIOS Updating Files
Step 1:
Connect the USB flash drive to the system. Boot-up the system into DOS. Input
commands to get into the directory of the BIOS updating files
(ex. cd (folder name)).
Figure B-8: BIOS Updating File Directory
Advertising