Figure 7-14: vga driver setup operations – IEI Integration IEM-945GSE User Manual
Page 112
Advertising
IEM-945GSE ETX 3.0 Module
Page 100
Step 31:
Click N
EXT
to continue.
Step 32:
Setup Operations are performed as shown in Figure 7-14.
NOTE:
The “Found New Hardware Wizard” will appear and then disappear
during this step. Do not adjust any settings in the “Found New
Hardware Wizard” window.
Figure 7-14: VGA Driver Setup Operations
Step 33:
Once the Setup Operations are complete, click N
EXT
to continue.
Step 34:
The Finish screen appears.
Advertising