IEI Integration IEM-945GSE - Manual (Page 71)

IEM-945GSE ETX 3.0 Module
Page 59
ƒ Normal Default
ƒ IrDA
ƒ ASK IR
ƒ Serial Port2 Address [2F8/IRQ3]
Use the Serial Port2 Address option to select the I/O and IRQ addresses.
Î
Disabled No base address is assigned to Serial Port 2
Î
2F8/IRQ3 D EFAULT I/O port address is 3F8 and the interrupt address is IRQ3
Î
3E8/IRQ4 I/O port address is 3E8 and the interrupt address is IRQ4
Î
2E8/IRQ3 I/O port address is 2E8 and the interrupt address is IRQ3
ƒ Serial Port2 Mode [Normal]
Use the Serial Port2 Mode option to select the transmitting and receiving mode.
ƒ Normal Default
ƒ IrDA
ƒ ASK IR