IEI Integration eKINO-945GSE v1.01 - Manual (Page 103)

eKINO-945GSE Motherboard
Page 87
Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
9
Figure 5-15. Step 2:
Figure 5-15: USB Connector
5.10.5 VGA Monitor Connection
The eKINO-945GSE has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the eKINO-945GSE, please follow the instructions below.
Step 3: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 4: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.