IEI Integration eKINO-945GSE v1.01 - Manual (Page 104)

eKINO-945GSE Motherboard
Page 88
Step 5: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
eKINO-945GSE. See
9
Figure 5-16.
Figure 5-16: VGA Connector
Step 6: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0: