Ativa P75234 - Manual (Page 52)

47
2
1
3
4
5
6
7
8
9
10
se
ct
io
n
Using the Web-Based Advanced User Interface
WPA (Wi-Fi Protected Access)
WPA (Wi-Fi Protected Access) is a new Wi-Fi standard that was designed to
improve upon the security features of WEP. To use WPA security, the drivers
and software of your wireless equipment must be upgraded to support WPA.
These updates will be found on the wireless vendor’s website. There are two
types of WPA security, WPA-PSK (no server) and WPA (with radius server).
WPA-PSK (no server) uses what is known as a pre-shared key as the
network key. A network key is basically a password that is between eight
and 63 characters long. It can be a combination of letters, numbers, or
characters. Each client uses the same network key to access the network.
Typically, this is the mode that will be used in a home environment.
For a list of Ativa wireless products that support WPA, please visit our
website at www.ativasupport.com.
Sharing the Same Network Keys
Most Wi-Fi products ship with security turned off. So once you have your
network working, you must activate WEP or WPA and make sure your
wireless networking devices are sharing the same network key.