IEI Integration IMBA-Q870-i2 - Manual (Page 114)

IMBA-Q870-i2 ATX Motherboard
Page 96
5.3.5 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Controller(s)
[Enabled]
SATA Mode Selection [IDE]
SATA1 Port
Empty
SATA2 Port Empty
SATA3 Port Empty
SATA4 Port Empty
SATA5 Port Empty
SATA6 Port Empty
Enable or disable SATA
Device
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 7: SATA Configuration
Î SATA Controller(s) [Enabled]
Use the SATA Controller(s) option to enable or disable the serial ATA controller.
Î Enabled D EFAULT Enables the on-board SATA controller.
Î
Disabled Disables the on-board SATA controller.
Î SATA Mode Selection [IDE]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.
Î
IDE D EFAULT Configures SATA devices as normal IDE device.
Î
AHCI Configures SATA devices as AHCI device.
Î
RAID Configures SATA devices as RAID device.