4 msata slot setup – IEI Integration IMBA-Q870-i2 User Manual
Page 86
Advertising
IMBA-Q870-i2 ATX Motherboard
Page 68
Setting Description
Short 1-2
No override (Default)
Short 2-3
Override
Table 4-1: Flash Descriptor Security Override Jumper Settings
Figure 4-14: Flash Descriptor Security Override Jumper Location
4.3.4 mSATA Slot Setup
The mSATA Slot Setup jumper specifies whether to automatically detect the mSATA
device installed in the mSATA card slot (CN2). If the user shorts the mSATA Slot Setup
jumper to force the system to enable mSATA device, the S_ATA6 connector will be
disabled.
Setting Description
Open
Automatically detect mSATA device (Default)
Short
Force to enable mSATA device
(The S_ATA6 connector will be disabled)
Table 4-2: mSATA Slot Setup Jumper Settings
Advertising