IEI Integration NANO-LX v1.21 - Manual (Page 115)

NANO-LX EPIC SBC
Page 100
IDE device configurations are changed or set in the IDE Configuration menu (BIOS Menu
3). If an IDE device is detected, and one of the above listed two BIOS configuration
options is selected, the IDE configuration options shown in Section 6.2.1 appear.
Drive A [1.44M, 3.5in]
Use the Drive A configuration to specify the floppy drive type installed in the system. The
floppy drive configuration options are:
None
360K, 5.25 in.
1.2M, 5.25 in.
720K, 3.5 in.
1.44M, 3.5in (Default)
2.88M, 3.5 in.
Halt On [All, But Keyboard]
Use the Halt On option to specify what errors detected during the power up process stop
the system.
All Errors Whenever BIOS detects a non-fatal error the
system is stopped and the user prompted.
No Errors The system boot is not stopped for any errors
that may be detected.
All, But Keyboard (Default) The system boot does not stop for a keyboard
error; it stops for all other errors.
All, But Diskette The system boot does not stop for a disk
error; it stops for all other errors.
All, But Disk/Key The system boot does not stop for a keyboard
or a disk error; it stops for all other errors.