IEI Integration NANO-LX v1.21 - Manual (Page 134)

NANO-LX EPIC SBC
Page 119
IR-Rx2Tx2 (Default)
Onboard Serial Port # [XXX]
Use the Onboard Serial Port # option to select the I/O address and IRQ for any additional
onboard serial ports. The Onboard Serial Port # address options are:
Disabled
3F8
2F8
3E8
2E8
Serial Port # Use IRQ [XXX]
Use the Serial Port # Use IRQ option to select the IRQ for the additional onboard serial
ports listed above. The Serial Port # Use IRQ IRQ options are:
IRQ3
IRQ4
IRQ5
Onboard Parallel Port [378/IRQ7]
Use the Onboard Parallel Port option to specify a logical LPT port address and
corresponding interrupt for the physical parallel port. The Onboard Parallel Port options
are:
Disabled
378/IRQ7 (Default)
278/IRQ5
3BC/IRQ7
Parallel Port Mode [SPP]
Use the Parallel Port Mode option to select parallel port operation mode.
SPP (Default) The parallel port operates in the standard parallel port
(SPP) mode. This parallel port mode works with most