IEI Integration NANO-9453 v1.0 - Manual (Page 90)

NANO-9453 EPIC Motherboard
Page 72
5.3.3 SO-DIMM Installation
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the NANO-9453. Please make sure the purchased SO-DIMM complies
with the memory specifications of the NANO-9453. SO-DIMM
specifications compliant with the NANO-9453 are listed in Chapter 2.
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer
Figure 5-6.
Figure 5-6: SO-DIMM Installation
Step 1: Locate the SO-DIMM socket. Place the NANO-9453 on an anti-static pad with
the solder side facing up.
Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.
Step 3: Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See
Figure 5-6)