IEI Integration TANK-700-QM67 v2.00 - Manual (Page 49)

TANK-700 Em b e d d e d S ys te m
P a g e 37
Pin Description Pin Description
1 DCD 6 DSR
2 RX 7 RTS
3 TX 8 CTS
4 DTR 9 RI
5 GND
Table 3-11: Serial Port Pinouts
Figure 3-29: Serial Port Pinout Location
3.9.15 S FP Fib e r Co n n e c to rs
The TANK-700 has two SFP fiber connectors. The locations of the connectors are shown
in Figure 1-3. To install an SFP module, refer to Section 3.6.
3.9.16 US B Co n n e c to rs
CN La b e l: US B
CN Typ e : USB port
CN Lo c a tio n : See Figure 1-2 and Figure 1-3
CN P in o u ts : See Table 3-12
The USB ports are for connecting USB peripheral devices to the system.
S te p 1: Locate the USB connectors. The locations of the USB connectors are shown
in Figure 1-3.
S te p 2: Align the connectors. Align the USB device connector with one of the
connectors. See Figure 3-30.