3 compactflash® card installation, Ompact, Lash – IEI Integration S12A v3.00 User Manual
Page 26: Nstallation, Figure 3-4: compactflash® card installation
Advertising
SAILORPC-12A Panel PC
Page 16
3.3 CompactFlash® Card Installation
This section covers the installation of the CompactFlash® card.
Step 1:
Remove the back cover as shown in the hard drive installation above.
Step 2:
Install the CompactFlash® card in the slot indicated below.
Figure 3-4: CompactFlash® Card Installation
Step 3:
Replace the cover and fasten the screws.
Step 4:
Make sure the outer seal is seated properly, then replace the cover.
S
te
p
0
:
Advertising
This manual is related to the following products: