IEI Integration S12A v3.00 - Manual (Page 60)

SAILORPC-12A Panel PC
Page 50
ƒ Mode Setting [Full On Mode]
Use the Mode Setting option to configure the second fan.
Î
Full On Mode D EFAULT
Fan is on all the time
Î
Automatic mode The fan adjusts its speed using these settings:
Temp. Limit of OFF
Temp. Limit of Start
Fan Start PWM
Slope PWM 1
Î
PWM Manual mode The fan spins at the speed set in:
Fan PWM control
ƒ Temp. Limit of OFF [000]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
ƒ Minimum Value: 0°C
ƒ Maximum Value: 127°C
ƒ Temp. Limit of Start [020]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
ƒ Minimum Value: 0°C
ƒ Maximum Value: 127°C