IEI Integration PPC-5xxx-9455 v1.10 - Manual (Page 105)

PPC-5xxx-9455 Panel PC
Page 87
Î
IrDA Serial Port 2 mode is IrDA
Î
ASK IR Serial Port 2 mode is ASK IR
Î Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Î
Disabled No base address is assigned to the Parallel Port
Î
378 D EFAULT Parallel Port I/O port address is 378
Î
278 Parallel Port I/O port address is 278
Î
3BC Parallel Port I/O port address is 3BC
Î Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Î
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
Î
Bi-directional Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
Î
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.