Figure 4-3: hdd sata connector, Figure 4-4: hdd retention screws – IEI Integration PPC-5xxx-9455 v1.10 User Manual
Page 68
Advertising
PPC-5xxx-9455 Panel PC
Page 50
Figure 4-3: HDD SATA Connector
Step 4:
Attach the hard drive in the bracket. To do this, slide the hard drive onto the
bracket until it connects with the SATA connector at the back. Fasten the four
retention screws on the side.
Figure 4-4: HDD Retention Screws
Step 5:
Install the hard drive bracket (with hard drive and SATA cable attached) into the
PPC-5xxx-9455 and fasten the four hard drive bracket screws.
Step 0:
Advertising