Figure 4-28: arm mounting retention screw holes, Figure 4-29: arm mounting – IEI Integration PPC-37xx-N270 v2.20 User Manual
Page 67
Advertising
PPC-37xx-N270 Panel PC
Page 53
Step 3:
Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The arm mount retention screw holes are shown in Figure 4-28.
Figure 4-28: Arm Mounting Retention Screw Holes
Step 4:
Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the
flat panel PC.
S
te
p
0
:
Figure 4-29: Arm Mounting
Advertising