Figure 2-1: aluminum back cover retention screws, Figure 2-2: hdd bracket – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v2.20 User Manual
Page 26
Advertising
AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 15
Figure 2-1: Aluminum Back Cover Retention Screws
Step 3:
Slide the cover down and then lift to remove.
Figure 2-2: HDD Bracket
Step 4:
Locate the HDD bracket.
Step 5:
Insert the SATA connector end of the HDD into the bracket to connect the
motherboard SATA connector to the hard drive SATA connector as shown in the
figure below.
Advertising