3 usb device connection, Figure 2-31: serial device connector – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v2.20 User Manual
Page 52
Advertising
AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 41
Figure 2-31: Serial Device Connector
Step 3:
Secure the connector
. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
2.7.3 USB Device Connection
To connect USB devices to the AFL-W19A/W19B/17D/W15A-N270, please follow the
instructions below.
Step 1:
Located the USB connectors
. The locations of the USB connectors are shown
in Chapter 2.
Step 2:
Align the connectors.
Align the USB device connector with one of the
connectors on the bottom panel. See Figure 2-32.
Advertising