IEI Integration AFL-F08A v2.40 User Manual
User manual, Model
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Unpacking
- 3 Installation
- 3.1 Anti-static Precautions
- 3.2 Installation Precautions
- 3.3 Installation and Configuration Steps
- 3.4 Removing the Back Cover
- 3.5 CF Card Installation
- 3.6 Internal Cover Removal
- 3.7 Jumper Settings
- 3.8 Mounting the System
- 3.9 Bottom Panel Connectors
- 3.10 Powering On the System
- 3.11 Powering Off the System
- 4 System Maintenance
- 5 BIOS
- 6 Interface Connectors
- 6.1 Peripheral Interface Connectors
- 6.2 Internal Peripheral Connectors
- 6.2.1 Audio Line-out Connector (CN8)
- 6.2.2 Audio Speaker-out Connector (CN3)
- 6.2.3 Audio MIC-in Connector (MIC1)
- 6.2.4 Audio DMIC-in Connector (DMIC1)
- 6.2.5 Battery Connector (BT1)
- 6.2.6 CompactFlash® Type II Slot (CF1)
- 6.2.7 CRT Connector (CN4)
- 6.2.8 DIO Connector (DIO1)
- 6.2.9 HDD Power Connector (CN1)
- 6.2.10 LED Indicator and Button Connector (JP2)
- 6.2.11 LVDS Backlight Connector (INVERTER1)
- 6.2.12 MCU Connector (JP7)
- 6.2.13 MCU Connector (TS2)
- 6.2.14 PCIe Mini Slot (CN2)
- 6.2.15 RFID Connector (JP8)
- 6.2.16 SATA Connector (SATA1)
- 6.2.17 Touch Panel Connector (TS1)
- 6.2.18 TTL Panel Connector (CN7)
- 6.2.19 JUSB Connector (JUSB1)
- 6.2.20 USB Connector (USB1)
- 6.2.21 USB Connector (USB2)
- 6.2.22 USB Connector (USB4)
- 6.3 External Interface Panel Connectors
- 6.4 Preconfigured Jumper Settings
- 6.4.1 Backlight Voltage Selection Jumper (J_BL1)
- 6.4.2 Inverter Power Selection Jumper (JP12)
- 6.4.3 LVDS Panel Voltage Selection Jumper (J_VLVDS1)
- 6.4.4 MCU LCD Type Selection Jumper (JP14)
- 6.4.5 MCU PWM Power Selection Jumper (JP13)
- 6.4.6 Panel Type Selection Jumper (J_LCD_TYPE1)
- 6.4.7 Touchscreen Selection Jumper (J1)
- 6.4.8 USB2 and USB4 Power Selection Jumper (JP15)
- A BIOS Options
- B ALC892 Digital Microphone Configuration
- C One Key Recovery
- D Watchdog Timer
- E Safety Precautions
- F Hazardous Materials Disclosure
- G Terminology