IEI Integration AFL-F08A v2.40 User Manual
Page 45
Advertising
AFL-F08A-N270 Panel PC
Page 30
Figure 3-14: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mount kit into the
four screw holes on the real panel and tighten until the screw shank is secured
against the rear panel (
77
Figure 3-15
).
WARNING:
Please use the M4 screws provided in the wall mount kit for the rear
panel. If the screw is missing, the thread depth of the replacement
screw should be not more than 4 mm.
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Advertising