IEI Integration AFL2-08A-N26 - Manual (Page 51)

AFL2-08A-N26
P a g e 35
4.11.3 S ta n d Mo u n tin g
To mount the AFL2-08A-N26 using the stand mounting kit, please follow the steps below.
S te p 1: Locate the screw holes on the rear of the AFL2-08A-N26. This is where the
bracket will be attached. (Figure 4-14)
Figure 4-14: Mounting screw location
S te p 2: Align the bracket with the screw holes.
S te p 3: To secure the bracket to the AFL2-08A-N26, insert the retention screws into the
screw holes and tighten them. S te p 0:
4.12 Exte rn a l P e rip h e ra l De vic e Co n n e c tio n
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Audio devices
 Display devices
 RJ-45 Ethernet cable connector
 Serial port devices
 USB devices