IEI Integration AFL2-08A-N26 - Manual (Page 53)

AFL2-08A-N26
P a g e 37
4.12.2 Dis p la y De vic e Co n n e c tio n
The DisplayPort connector transmits a digital signal to compatible DisplayPort display
devices such as a TV or computer screen. To connect the DisplayPort cable to the
AFL2-08A-N26, follow the steps below.
S te p 1: Locate the DisplayPort connector. The location is shown in Chapter 1.
S te p 2: Align the connector. Align the DisplayPort connector with the DisplayPort port.
Make sure the orientation of the connector is correct.
Figure 4-16: DisplayPort Connection
S te p 3: Insert the DisplayPort connector. Gently insert the DisplayPort connector. The
connector should engage with a gentle push. If the connector does not insert
easily, check again that the connector is aligned correctly, and that the connector
is being inserted with the right way up.
4.12.3 LAN Co n n e c tio n
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
S te p 1: Locate the RJ-45 connector. The location of the LAN connector is shown in
Chapter 1.