IEI Integration TDM_Series v2.01 - Manual (Page 31)

TDM Series Monitor
Page 17
2.5 Mounting Kits
The following sections describe the various optional mounting kits available for each
model of the TDM series industrial monitor. Refer to Section 4.4.7 for detailed instructions
on the different mounting methods for the monitors.
Table 2-2 lists the mounting kits available for the TDM series monitor.
Model TDM-121GMS TDM-150GMS
Panel Mounting Kit PK-121M PK-150M
Wall Mounting Kit WK-121MS-R10 WK-150MS-R10
Rack Mounting Kit RK-121MS-R10 RK-150MS-R10
LCD Monitor Arm ARM-11 ARM-31
LCD Monitor Stand STAND-100-RS STAND-200-RS
Table 2-2: TDM Series Mounting Kits
2.6 Mounting Options
Each TDM series industrial monitor has a number of mounting holes or slots located on
the back side of the aluminum frame or on the rear panel for mounting the monitor to a
rack, panel, cabinet, rail, wall, arm or stand. The following sections describe the various
mounting methods or each model of the TDM series industrial monitor.
2.6.1 Panel Mounting
Each model of the TDM series industrial monitor has a series of mounting slots located on
the top and bottom panel for mounting the monitor to a panel.
Table 2-3 lists the number of mounting clamps required to mount the monitor to a panel.