IEI Integration IVCME-C604 - Manual (Page 35)

IVCE-C608/IVCE-C604/IVCME-C604 Capture Card
Page 7
Figure 4-2: IVCE-C604 Connectors and Pinouts (pin numbers in red)
4.1.2.1 IVCE-C604 Switch (SW1)
Use the 16-position rotary switch (SW1) to set the ID for the board. Up to 16 IVCE-C604
can be installed in a single system. Each card must be allocated a unique ID. Switch ID
settings are explained in more detail in Section 5.4.5.
4.1.2.2 IVCE-C604 LED Screen (LED2)
The LED screen shows the ID number of the IVCE-C604. Sixteen IVCE-C604 cards can
be connected together in a singles system. Each card has a unique ID setting as specified
by the unique rotary switch (SW1) setting described above and in Section 5.4.5. The
unique card ID specified by the rotary switch (SW1) is specified on the screen.
4.1.2.3 IVCE-C604 LED Indicators (LED1)
The LED indicator (LED1) includes three LED indicators: amber, green and red. These
LED indicators show the system status as described below:
ƒ Amber: watchdog timer alarm