Alpine TDA-7547E - Manual (Page 23)

24
Radio Operation
English
Press the Audio Control button to store the first
character. The first character will stop blinking
and the display will automatically advance to
the next character. When that character begins
to blink, you may choose the next letter or
symbol of your title.
Press and hold the TITLE button for at least 3
seconds to record the title.
Repeat the steps 4 and 5 above to complete
the titling. All 8 character positions should be
filled. Use spaces where characters are not
needed (for example at the end of a 5 character
title, use 3 spaces to complete the title).
5
6
7
Titling Stations
(Continued)
Notes:
•
When you want to erase a title, enter
the "
" symbol into all spaces.
When the title memory is used up, the
display shows "FULL DATA." Storing
new station titles after the "FULL
DATA" message has been displayed,
causes previously stored titles to be
erased. The new station titles will
replace the old titles beginning with
the first one created.
•
If the battery lead is disconnected, the
memorized titles will be erased.
ALPINE
or
A
ALPINE
5
7
TITLE