Alpine TDA-7547E - Manual (Page 5)

6
English
Precautions
Temperature
Be sure the temperature inside the vehicle is
between +60
°
C (+140
°
F) and –10
°
C (+14
°
F)
before turing your unit on.
Tape Slack
Check and make sure any slack in the tape is
taken up before inserting the tape into the unit.
A loose tape can get caught in the mechanism
and cause damage to the unit and the tape
itself. Tighten the tape by inserting a pencil or a
similar instrument into the spindle hole and turn
until all the slack has been taken up.
Excessively Thin Tape
C-120 type cassette tapes are not recom-
mended for use in automobile tape players.
Precision Tape Mechanism
Prevent any foreign objects from entering the
cassette opening as the precision mechanism
and tape head may be damaged.
Never play dirty or dusty tapes – they can
damage the tape head.
Tape Head Cleaning
Periodic cleaning (approximately every 20
hours of use) of the tape head with a wet type
head-cleaning cassette tape (available at audio
stores) is necessary for best performance.
Fuse Replacement
When replacing the fuse(s), the replacement
must be of the same amperage as shown on
the fuse holder. If the fuse blows more than
once, carefully check all electrical connections
for shorted circuitry. Also have your vehicle's
voltage regulator checked
Maintenance
If you have problems, do not attempt to repair
the unit yourself. Return it to your Alpine dealer
or the nearest Alpine Service Station for
servicing.
– PWR SOURCE A.S.U.
TUNE·A. ME
UP BAND PROG
TITLE
R. MONI
DETACHABLE FRONT PANEL
DISK
TITLE
MEMORY
D.A.P. 1
M.I.X. 4
MONO 2
RPT 5
3
SCAN 6
F
DN
B. SKIP
DEMO
CASSETTE RECEIVER 35Wx4 DOLBY B NR TDA-7548
REM OTE SENSOR EYE
A U D IO C O NT RO L
M O D E
LO U D IN D U
T.S.M
CLK
M.I.X. ALL REPEAT MTL DX SEEK B.SKIP ST D.A.P. LOUD
MO
R.MONI
HEAD