Master Manufacturing 15/25 Gallon New Direction Trailer Sprayer - Manual (Page 2)

New Direction Trailer Sprayer
Note: Do not return product to the distributor/dealer for warranty work. Call Master Manufacturing at (800)
864-1649 for any warranty work or replacement parts.
INTRODUCTION
Your Master Manufacturing New Direction Lawn Sprayer has been manufactured to provide years of dependable and
efficient use. Proper operation and maintenance will ensure long satisfactory service.
The purpose of this manual is to
assist you in the assembly, operation and maintenance of your sprayer or accessories. Please read through this
manual completely too fully understand how to operate and maintain your equipment. Keep your manual in a
safe, convenient place for future reference. Always mention the model and part number in any correspondence.
ASSEMBLY
The following instructions will guide you through the assembly of your New Direction Lawn Sprayer. Please
refer to the figures in this manual for reference to the following assembly instructions.
Trailer Assembly
1.) Locate trailer frame center section Item 1 (PN 32-100071) and place frame on floor or a sturdy table.
2.) At this point it needs to be decided if the frame will be assembled for a 15 gallon sprayer or a 25
gallon sprayer. The holes placed in the two cross brackets item 2 (PN 32-100078) determine the
width of the frame. Refer to Figure 1 for a 15 gallon tank or Figure 2 for a 25 gallon tank.
15 Gallon 25 Gallon
3.) Locate the two cross brackets Item 2 (PN 32-100078) and position them in channel from center
frame section (PN 32-100071). Ensure the two cross brackets orientation is correct and align the
proper holes for the correct tank size. Loosely fasten with two bolts item 12 (PN 33-100122) and
nuts item 14 (PN 33-100113). Do not tighten bolts. Bolts will be tightened after tank is fastened.