Master Manufacturing 15/25 Gallon New Direction Trailer Sprayer User Manual
Page 8
New Direction Trailer Sprayer
expensive chemicals. After all calibrations have been completed, add water and chemicals to the tank. Always
follow chemical manufacturer’s instructions for mixing.
CLEANING & STORAGE
Most spray materials are highly corrosive. The most important aspect of long dependable service from the
sprayer is a thorough cleaning immediately following each use. In addition, the residue of one type of chemical
could cause an undesirable effect when a different chemical is used for a different purpose.
The most effective cleaning method is to pump several rinses of clean water through the tank, pump, hoses,
boom, spray gun, etc. A neutralizing agent such as a solution of Nutra-Sol, a detergent or household ammonia
as recommended by the chemical manufacturer can assist in removal of a persistent chemical. When the system
is thoroughly cleaned, drain the tank, suction line, pump, and hoses.
The following steps should be followed for the maintenance and storage of your sprayer.
1. Wash and flush out sprayer after completion of each phase of your program. Flush out sprayer when
changing chemicals if there is a possibility of the chemicals being incompatible. Use of a detergent
is advisable if the chemical manufacturer does not make specific cleaning recommendations. Flush
system completely, including nozzles. Never use metal objects to open clogged nozzles.
2. Clean sprayer thoroughly before storing at the end of the spraying season. Permanent
type anti-freeze added to the final rinse will leave a rust inhibiting film in parts of the sprayer.
WARRANTY PARTS SERVICE
Products sold shall be warranted from defects in workmanship and material when used within the service and
scope for which they were designed for a period of one year from date of purchase. Contact Master
Manufacturing for replacements parts or warranty work at (800) 864-1649. Do not return product to your
distributor/dealer. Please have your original sales receipt or other proof of purchase date when requesting any
warranty work. To ensure the correct parts are acquired always provide the model number of your
sprayer/attachment and the part number and description obtained from the illustrated parts breakdown in this
manual.