ODL Tubular Skylight Solar Powered Dimmer - Manual (Page 6)

Pull the bottom adjustable tube up so that it
telescopes into the top adjustable tube.
You may have to have a second person or use a scrap
piece of wood to keep the bottom adjustable tube
from lowering.
4
Release the lock tabs that secure the bottom
adjustable tube to the ceiling ring. You may have to
use the tip of a standard screwdriver to release the
lock tabs.
3
2
Prepare The Tubular Skylight
Flat Screwdriver
Needle Nose Pliers
Ladder
Safety Glasses
Gloves
TOOLS
Pull gasket out of the ceiling trim ring with needle
nose pliers and discard. This will allow the dimmer
to fit better.
5
4
3
2
Foil Tape
Carefully remove the foil tape that seals the top and
bottom tubes.
2
5
Remove Gasket
Inside the attic, move any insulation away from the
work area.
1
5