AVerMedia Technologies 500 User Manual
Page 32
Chapter 3 Using the AVerKey500 Pro
29
MOUSE/KEY500 :
This LED shows which type of mode the remote
control is currently in.
If the LED light is off, it means that the remote is
operating in AVerKey500 Pro mode.
If the LED light is on, it means that the remote is
operating in Remote Mouse mode.
FREEZE :
This LED shows whether FREEZE or UNFREEZE
is in operation.
If this LED light is on, it means that the user has
paused, i.e, frozen the screen.
PAN/POS :
This LED works in conjunction with the PAN/POS
button of the Touch-Button Control Panel.
If the LED is OFF, it means that the panning
function is active.
If the LED is ON, it means that the positioning
function is active.
Infrared Sensor :
The infrared sensor (at the middle of the front panel)
receives incoming commands from the remote
control.
DRAW :
This LED works in conjunction with the L.DRAW
and R.DRAW buttons of the Remote Control. It
lights up when you are selecting objects or
performing a drag-and-drop.
READY :
If this LED light is on, it indicates that the
AVerKey500 Pro is ready for use.
POWER :
This red LED is the power ON/OFF indicator. If this
LED is on, it indicates that the AVerKey500 Pro
has been powered ON.