Hardware installation and setup, Chapter 2, The back panel – AVerMedia Technologies 500 User Manual
Page 9
6
Chapter 2
Hardware Installation and Setup
This chapter will show you how to install the AVerKey500 Pro to an IBM
compatible PC, Macintosh computer and NEC 98 PC.
The Back Panel
The ports on the back panel of the AVerKey500 Pro are for connecting the
converter to the computer and graphics display monitor. The figure and
descriptions below specify what device should go into each port.
¬
POWER
: Plug
the
AC Power Adapter to this port.
VGA
IN :
For IBM PC or compatible :
This port connects the AVerKey500 Pro to the IBM
compatible PC’s VGA port via the supplied Computer
Extension Cable.
For Macintosh :
This port connects the AVerKey500 Pro to the Macintosh
PC’s display card via the Computer Adapter and Computer
Extension Cable. (The Computer Adapter is provided as an
optional accessory.)