Probuilt Professional Lighting Hang-A-Light 200w Fluorescent User Manual
Page 2
LAMP INSTALLATION AND RELAMPING:
1. Install the supplied lamp by threading the base into the ceramic mogul socket. NEVER TIGHTEN OR LOOSEN
THE FLUORESCENT LAMP BY HOLDING ONTO GLASS TUBES.
2. Connect plug to 120V / 60Hz / 15A power supply.
Specifications are subject to change without notice. It is the responsibility of the purchaser and/or
end‐user to determine the appropriateness for the intended use. These instructions do not claim to
provide directions for meeting every possible contingency that could arise during installation, operation
or maintenance. For additional information please contact ProBuilt Professional Lighting at
877‐707‐0800
(105W)
(200W)
Hang‐A‐Light
®
PRODUCT REGISTRATION:
In order to receive important product information and updates, please follow these steps to register your Hang‐A‐Light
®
products:
1. Send an e‐mail to [email protected]
2. Post the word “registration” in the subject field.
Include your name, addres and model type(s). Privacy policy: your registration information will never be sold or utilized
outside of ProBuilt.