Andrew ES76PK-1 User Manual
Page 4
24-hour Technical Assistance
For technical assistance, call the following numbers at anytime.
Call From
Call To
Telephone
Fax
North America (toll free)
U. S. A.
1-(800)-255-1479
(800)-349-5444
Any Location
U. S. A.
(708)-349-3300
(708)-349-5410
(International)
Customer Service Center
The Andrew Customer Service Center gives you direct access to the information and
personnel service you need, such as the following:
•
Place or change orders
•
Check price and delivery information
•
Request technical literature
You can call from any of the following:
Call From
Telephone
Fax
North America
1-800-255-1479 (toll free)
1-(800)-349-5444 (toll free)
United Kingdom
00-800-0-255-1479 (toll free)
00-800-0-349-5444 (toll free)
Australia
0011-800-0-255-1479 (toll free) 0011-800-0-349-5444 (toll free)
China
00-800-0-255-1479 (toll free)
00-800-0-349-5444 (toll free)
New Zealand
00-800-0-255-1479 (toll free)
00-800-0-349-5444 (toll free)
Hong Kong
001-800-0-255-1479 (toll free) 001-800-0-349-5444 (toll free)
Proprietary Data
Information and
Assistance
Notice
Technical
Assistance
The technical data contained herein is proprietary to Andrew Corporation. It is intended
for use in operation and maintenance of Andrew supplied equipment. This data shall not
be disclosed or duplicated in whole or in part without express written consent of Andrew
Corporation.
Andrew Corporation provides a world-wide technical support network. Refer to the tech-
nical assistance portion of this this manual for the contact numbers appropriate to your
location.
The installation, maintenance, or removal of antenna systems requires qualified, experi-
enced personnel. Andrew installation instructions have been written for such personnel.
Antenna systems should be inspected by qualified personnel to verify proper installation,
maintenance and condition of equipment.
Andrew Corporation disclaims any liability or responsibility for the results of improper or
unsafe installation and maintenance practices.
All designs, specifications, and availabilities of products and services presented in this
manual are subject to change without notice.
Copyright © 2004, Andrew Corporation
4
Introduction